Features:
– Thermoplastic centrifugal pump.
– Self-priming Hidels pump, HONDA air-cooled 4-stroke gasoline engine.
– 2.1 kW/ 2.9 hp, capacity 560 L/min, capacity max. 26 m.
– For salt water and chemicals.
– PET (polyethylene terephthalate) for pump casing, impeller and volute casing.
– EPDM and carbon ceramic for mechanical seal.
– All stainless steel screws and washers.
– Supported by powerful and durable motors.
Performance Curve:
Documentation:
* This link leads to the parts list of the model PGH-50-BAA. If the complete designation of your pump model differs from this, please ask us for the correct parts list via our contact form.
Technical information:
| Connection diameter | 15 mm (2”) |
| Connection thread | Inner pipe thread BSP |
| Total head | 26 m |
| Delivery quantity | 560 L/min |
| Max. Suction height | 8 m |
| Grain size | Max. 2 mm |
| Mechanical Seal | Carbon ceramics |
| Max. Print | 0.26 MPa |
| Motor type | 4-stroke gasoline engine, air-cooled |
| Motor | Honda GX120 |
| Cubic Capacity | 122 ccm |
| Rated power | 2.1 kW (2.9 PS) / 3600 rpm |
| Max. Power | 2.4 kW (3.3 PS) / 3600 rpm |
| Fuel | Gasoline, unleaded |
| Tank capacity | 2.0 L |
| Cont. Operating time | Approx. 2 hours |
| Start method | Cable starter |
| Scope of delivery | 1 filter, 3 pipe sockets, 1 knee ear, 2 hose couplings, 3 hose clamps, 1 power tool set |
| Weight, net | 23 kg |
| Weight, gross | 24 kg |
| Dimensions LxWxH (cm) | 51 × 41.8 × 41.8 |
Performance:
A – Feed,
B – head,
C – Suction
*Performance may vary depending on conditions
